Font Size:big  middle  small

        LHA

        Number of visits: Date:2014-8-2 16:44

        LHA series            

        ●Rated voltage range up to 525Vdc

        ●Endurance with ripple current:5000hours at 105℃(2000hours for 500vdc-525vdc)
        ●High ripple capability ROHS compliant

        ●Applicable to High voltage power distribution cabinet, security system,
        Fujitsu Automatic NUmerical Control

        ◆SPECIFIC ATIONS

        items Characteristics
        Category temperature Range -40~+105℃(10-100VDC)、-25~+105℃(160-525VDC)
        Rated voltage Range 10~525VDC
        Capacitance Tolerance ± 20%(M)---------- at 20℃/120HZ
        Leakage Current I=0.02CV or 5mA,whichever is smaller
        I: Where, I : Max. leakage current(µA)、C: Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes)
        Dissipation Factor(tanδ) See standard ratings(10to250vdc) 0.2max(350vdc~525vdc) ------------at 20℃/120HZ
        Low Temperature characteristics Capacitance change C(-40℃)/C(+20℃)≥0.6(10to100vdc)
        C(-25℃)/C(+20℃)≥0.7(160to250vdc)
        C(-25℃)/C(+20℃)≥0.65(350to525vdc) -------at 20℃/120HZ
        Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
        Insulation Withstanding Voltage When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。
        Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃。(2000hours for 500&525vdc products at 105℃)
        Capacitance change ≤±20% of the initial value  
        D.F. (tanδ) ≤200% of the initial specified value
        Leakage current ≤The initial specified value
        Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
        Capacitance change ≤±20% of the initial value  
        D.F. (tanδ) ≤150% of the initial specified value
        Leakage current ≤The initial specified value

        SRANDRAD RATINGS

        W.V cap

        Case size

        D x L

        tanδ

        120HZ

        Rated ripple current

        (Ams/85℃,

        120HZ)

        Part NO. W.V cap

        Case size

        D x L

        tanδ

        120HZ

        Rated ripple current

        (Ams/85℃,

        120HZ)

        Part NO.
        [Vdc] [μF] [mm] 20℃ [Vdc] [μF] [mm] 20℃
        10 27000 35*80 0.45 4.3 LHA100M5B273TA80 25 22000 35*80 0.35 4.5 LHA250M5B223TA80
        33000 35*80 0.45 4.7 LHA100M5B333TA80 27000 35*100 0.4 5 LHA250M5B273TAA0
        39000 35*80 0.45 5.3 LHA100M5B393TA80 33000 35*120 0.4 5.9 LHA250M5B333TAC0
        47000 35*100 0.45 6.1 LHA100M5B473TAA0 39000 50*80 0.4 6.5 LHA250M5C393TC80
        56000 35*100 0.5 6.2 LHA100M5B563TAA0 47000 50*100 0.4 7.9 LHA250M5C473TCA0
        68000 35*120 0.6 6.8 LHA100M5B683TAC0 56000 50*120 0.4 8.8 LHA250M5C563TCC0
        82000 50*80 0.6 7.8 LHA100M5C823TC80 68000 50*120 0.5 9.1 LHA250M5C683TCC0
        100000 50*100 0.7 8.5 LHA100M5C104TCA0 82000 63.5*100 0.5 10.6 LHA250M5C823TDA0
        120000 50*100 0.7 9.5 LHA100M5C124TCA0 100000 63.5*120 0.6 11.4 LHA250M5C104TDC0
        150000 63.5*100 0.8 11 LHA100M5C154TDA0 120000 76.2*100 0.6 12.8 LHA250M5C124TEA0
        180000 63.5*100 0.8 12.1 LHA100M5C184TDA0 150000 76.2*120 0.75 13.7 LHA250M5C154TEC0
        220000 76.2*100 1 13.2 LHA100M5C224TEA0 180000 76.2*140 0.75 16.1 LHA250M5C184TEE0
        270000 76.2*120 1.2 14.4 LHA100M5C274TEC0 220000 89*140 1 16.6 LHA250M5C224TFE0
        330000 76.2*140 1.2 17 LHA100M5C334TEE0 35 8200 35*80 0.3 3 LHA350M5B822TA80
        390000 89*140 1.4 18.6 LHA100M5C394TFE0 10000 35*80 0.3 3.3 LHA350M5B103TA80
        16 15000 35*50 0.45 2.9 LHA160M5B153TA50 12000 35*80 0.3 3.6 LHA350M5B123TA80
        18000 35*80 0.45 3.5 LHA160M5B183TA80 15000 35*80 0.3 4.1 LHA350M5B153TA80
        22000 35*80 0.45 3.9 LHA160M5B223TA80 18000 35*100 0.3 4.8 LHA350M5B183TAA0
        27000 35*80 0.45 4.3 LHA160M5B273TA80 22000 35*120 0.35 5.2 LHA350M5B223TAC0
        33000 35*100 0.5 4.8 LHA160M5B333TAA0 27000 50*80 0.4 5.9 LHA350M5C273TC80
        39000 35*100 0.5 5.3 LHA160M5B393TAA0 33000 50*100 0.4 6.6 LHA350M5C333TCA0
        47000 35*120 0.5 6.2 LHA160M5B473TAC0 39000 50*120 0.4 7.8 LHA350M5C393TCC0
        56000 50*80 0.6 6.3 LHA160M5C563TC80 47000 50*120 0.45 8 LHA350M5C473TCC0
        68000 50*100 0.6 7.6 LHA160M5C683TCA0 56000 63.5*100 0.45 9.2 LHA350M5C563TDA0
        82000 50*120 0.7 8.3 LHA160M5C823TCC0 68000 63.5*120 0.45 11 LHA350M5C683TDC0
        100000 50*120 0.7 9.2 LHA160M5C104TCC0 82000 76.2*120 0.5 12.7 LHA350M5C823TEC0
        120000 63.5*100 0.8 9.9 LHA160M5C124TDA0 100000 76.2*140 0.6 13.5 LHA350M5C104TEE0
        150000 76.2*100 0.8 12.3 LHA160M5C154TEA0 120000 89*140 0.6 16.1 LHA350M5C124TFE0
        180000 76.2*120 0.8 14.5 LHA160M5C184TEC0 50 3900 35*50 0.2 2 LHA500M5B392TA50
        220000 76.2*140 1 15.2 LHA160M5C224TEE0 4700 35*50 0.25 2.2 LHA500M5B472TA50
        270000 89*140 1.2 16.8 LHA160M5C274TFE0 5600 35*80 0.25 2.8 LHA500M5B562TA80
        25 12000 35*80 0.35 3.3 LHA250M5B123TA80 6800 35*80 0.25 3 LHA500M5B682TA80
        15000 35*80 0.35 3.7 LHA250M5B153TA80 8200 35*80 0.25 3.3 LHA500M5B822TA80
        18000 35*80 0.35 4 LHA250M5B183TA80 10000 35*80 0.25 3.7 LHA500M5B103TA80
        50 12000 35*100 0.25 4.4 LHA500M5B123TAA0 80 18000 63.5*120 0.25 8 LHA800M5C183TDC0
        15000 35*120 0.3 4.7 LHA500M5B153TAC0 22000 76.2*100 0.25 9.1 LHA800M5C223TEA0
        18000 50*80 0.35 4.8 LHA500M5C183TC80 27000 76.2*120 0.3 9.7 LHA800M5C273TEC0
        22000 50*100 0.35 5.9 LHA500M5C223TCA0 33000 76.2*140 0.3 11.5 LHA800M5C333TEE0
        27000 50*120 0.35 7 LHA500M5C273TCC0 39000 89*140 0.35 12.5 LHA800M5C393TFE0
        33000 63.5*100 0.4 7.6 LHA500M5C333TDA0 100 1200 35*50 0.15 1.4 LHA101M5B122TA50
        39000 63.5*120 0.4 8.9 LHA500M5C393TDC0 1500 35*80 0.15 1.6 LHA101M5B152TA80
        47000 63.5*120 0.4 9.8 LHA500M5C473TDC0 1800 35*80 0.15 1.8 LHA101M5B182TA80
        56000 76.2*120 0.4 11.9 LHA500M5C563TEC0 2200 35*80 0.15 2 LHA101M5B222TA80
        68000 76.2*140 0.45 13.1 LHA500M5C683TEE0 2700 35*50 0.15 2.4 LHA101M5B272TA80
        82000 89*140 0.5 14.8 LHA500M5C823TFE0 3300 35*100 0.15 2.8 LHA101M5B332TAA0
        63 2700 35*50 0.15 1.9 LHA630M5B272TA50 3900 35*120 0.15 3.1 LHA101M5B392TAC0
        3300 35*50 0.15 2.1 LHA630M5B332TA50 4700 50*80 0.15 3.6 LHA101M5C472TC80
        3900 35*80 0.2 2.7 LHA630M5B392TA80 5600 50*100 0.15 4.3 LHA101M5C562TCA0
        4700 35*80 0.2 2.9 LHA630M5B472TA80 6800 50*120 0.15 5 LHA101M5C682TCC0
        5600 35*80 0.2 3.2 LHA630M5B562TA80 8200 50*120 0.15 5.5 LHA101M5C822TCC0
        6800 35*80 0.2 3.5 LHA630M5B682TA80 10000 63.5*100 0.15 6.4 LHA101M5C103TDA0
        8200 35*100 0.2 4.2 LHA630M5B822TAA0 12000 63.5*120 0.2 6.6 LHA101M5C123TDC0
        10000 35*120 0.25 4.3 LHA630M5B103TAC0 15000 76.2*100 0.2 7.5 LHA101M5C153TEA0
        12000 50*80 0.25 4.8 LHA630M5C123TC80 18000 76.2*120 0.25 8 LHA101M5C183TEC0
        15000 50*100 0.25 5.9 LHA630M5C153TCA0 22000 76.2*140 0.25 9.4 LHA101M5C223TEE0
        18000 50*120 0.25 6.3 LHA630M5C183TCC0 27000 89*140 0.3 10.4 LHA101M5C273TFE0
        22000 50*120 0.3 6.7 LHA630M5C223TCC0 160 680 35*50 0.15 1.1 LHA161M5B681TA50
        27000 63.5*120 0.3 8.8 LHA630M5C273TDC0 820 35*80 0.15 1.2 LHA161M5B821TA80
        33000 76.2*100 0.3 10 LHA630M5C333TEA0 1000 35*80 0.15 1.3 LHA161M5B102TA80
        39000 76.2*120 0.35 10.7 LHA630M5C393TEC0 1200 35*80 0.15 1.5 LHA161M5B122TA80
        47000 76.2*140 0.35 12.5 LHA630M5C473TEE0 1500 35*80 0.15 1.7 LHA161M5B152TA80
        56000 89*140 0.4 13.8 LHA630M5C563TFE0 1800 35*100 0.15 2 LHA161M5B182TAA0
        80 2200 35*50 0.15 1.9 LHA800M5B222TA50 2200 35*120 0.15 2.3 LHA161M5B222TAC0
        2700 35*80 0.15 2.2 LHA800M5B272TA80 2700 35*120 0.15 2.7 LHA161M5B272TAC0
        3300 30*80 0.15 2.5 LHA800M5B332TA80 3300 50*100 0.15 3.3 LHA161M5C332TCA0
        3900 35*80 0.15 2.9 LHA800M5B392TA80 3900 50*120 0.15 3.8 LHA161M5C392TCC0
        4700 35*100 0.15 3.1 LHA800M5B472TAA0 4700 50*120 0.15 4.2 LHA161M5C472TCC0
        5600 35*100 0.15 3.5 LHA800M5B562TAA0 5600 50*120 0.15 4.7 LHA161M5C562TCC0
        6800 35*120 0.2 4.1 LHA800M5B682TAC0 6800 63.5*120 0.15 5.7 LHA161M5C682TDC0
        8200 50*80 0.2 4.8 LHA800M5C822TC80 8200 76.2*100 0.2 6.4 LHA161M5C822TEA0
        10000 50*100 0.2 5.6 LHA800M5C103TCA0 10000 76.2*120 0.2 6.6 LHA161M5C103TEC0
        12000 50*100 0.2 6.1 LHA800M5C123TCA0 12000 76.2*140 0.2 7.8 LHA161M5C123TEE0
        15000 50*120 0.2 7.4 LHA800M5C153TCC0 15000 89*140 0.2 9.5 LHA161M5C153TFE0
        200 470 35*50 0.15 0.9 LHA201M5B471TA50 350 6800 76.2*125 0.2 16.8 LHA351M5C682MEC5
        560 35*80 0.15 1 LHA201M5B561TA80 8200 76.2*145 0.2 19.6 LHA351M5C822MEE5
        680 35*80 0.15 1.1 LHA201M5B681TA80 8200 89*125 0.2 18.9 LHA351M5C822MFC5
        820 35*80 0.15 1.3 LHA201M5B821TA80 10000 76.2*190 0.2 23 LHA351M5C103MEK0
        1000 35*100 0.15 1.5 LHA201M5B102TAA0 10000 89*145 0.2 22.2 LHA351M5C103MFE5
        1200 35*120 0.15 1.7 LHA201M5B122TAC0 15000 89*190 0.2 30.6 LHA351M5C153MFK0
        1500 35*120 0.15 1.9 LHA201M5B152TAC0 22000 89*270 0.2 43.5 LHA351M5C223MFT0
        1800 50*80 0.15 2.2 LHA201M5C182TC80 400 680 50*60 0.2 3 LHA401M5C681MC60
        2200 50*100 0.15 2.7 LHA201M5C222TCA0 1200 50*85 0.2 4.7 LHA401M5C122MC85
        2700 50*120 0.15 3.2 LHA201M5C272TCC0 1800 50*105 0.2 6.3 LHA401M5C182MCA5
        3300 50*120 0.15 3.5 LHA201M5C332TCC0 2200 50*125 0.2 7.5 LHA401M5C222MCC5
        3900 63.5*100 0.15 4 LHA201M5C392TDA0 2200 63.5*85 0.2 7.3 LHA401M5C222MD85
        4700 63.5*120 0.15 4.7 LHA201M5C472TDC0 2700 50*145 0.2 8.9 LHA401M5C272MCE5
        5600 76.2*100 0.15 5.3 LHA201M5C562TEA0 2700 63.5*105 0.2 8.8 LHA401M5C272MDA5
        6800 76.2*120 0.15 6.3 LHA201M5C682TEC0 3300 63.5*125 0.2 10.5 LHA401M5C332MDC5
        8200 76.2*140 0.2 6.4 LHA201M5C822TEE0 3300 76.2*85 0.2 9.9 LHA401M5C332ME85
        10000 89*140 0.2 7.7 LHA201M5C103TFE0 4700 63.5*145 0.2 13.4 LHA401M5C472MDE5
        250 330 35*50 0.15 0.7 LHA251M5B331TA50 4700 76.2*125 0.2 13.9 LHA401M5C472MEC5
        390 35*80 0.15 0.8 LHA251M5B391TA80 6800 76.2*145 0.2 17.9 LHA401M5C682MEE5
        470 35*80 0.15 0.9 LHA251M5B471TA80 6800 89*125 0.2 17.2 LHA401M5C682MFC5
        560 35*80 0.15 1 LHA251M5B561TA80 8200 76.2*190 0.2 20.8 LHA401M5C822MEK0
        680 35*100 0.15 1.2 LHA251M5B681TAA0 8200 89*145 0.2 20.1 LHA401M5C822MFE5
        820 35*100 0.15 1.4 LHA251M5B821TAA0 12000 89*190 0.2 27.4 LHA401M5C123MFK0
        1000 35*120 0.15 1.6 LHA251M5B102TAC0 18000 89*270 0.2 39.4 LHA401M5C183MFT0
        1200 50*80 0.15 1.8 LHA251M5C122TC80 450 560 50*60 0.2 2.6 LHA451M5C561MC60
        1500 50*100 0.15 2.2 LHA251M5C152TCA0 1000 50*85 0.2 4 LHA451M5C102MC85
        2200 50*120 0.15 2.8 LHA251M5C222TCC0 1200 50*105 0.2 4.8 LHA451M5C122MCA5
        2700 63.5*100 0.15 3.3 LHA251M5C272TDA0 1800 50*125 0.2 6.4 LHA451M5C182MCC5
        3300 63.5*120 0.15 4 LHA251M5C332TDC0 1800 63.5*85 0.2 6.2 LHA451M5C182MD85
        3900 76.2*100 0.15 4.4 LHA251M5C392TEA0 2200 50*145 0.2 7.6 LHA451M5C222MCE5
        4700 76.2*120 0.15 5.2 LHA251M5C472TEC0 2200 63.5*105 0.2 7.5 LHA451M5C222MDA5
        5600 76.2*140 0.15 6.1 LHA251M5C562TEE0 2700 63.5*125 0.2 8.9 LHA451M5C272MDC5
        6800 89*140 0.15 7.4 LHA251M5C682TFE0 2700 76.2*85 0.2 8.4 LHA451M5C272ME85
        350 820 50*60 0.2 3.3 LHA351M5C821MC60 3300 63.5*145 0.2 10.6 LHA451M5C332MDE5
        1500 50*85 0.2 5.2 LHA351M5C152MC85 3300 76.2*105 0.2 10.2 LHA451M5C332MEA5
        2200 50*105 0.2 7 LHA351M5C222MCA5 3900 76.2*125 0.2 11.9 LHA451M5C392MEC5
        2700 50*125 0.2 8.4 LHA351M5C272MCC5 4700 76.2*145 0.2 11.9 LHA451M5C472MEE5
        2700 63.5*85 0.2 8.1 LHA351M5C272MD85 5600 89*125 0.2 14.2 LHA451M5C562MFC5
        3300 50*145 0.2 9.9 LHA351M5C332MCE5 6800 76.2*190 0.2 17.3 LHA451M5C682MEK0
        3300 63.5*105 0.2 9.8 LHA351M5C332MDA5 6800 89*145 0.2 16.7 LHA451M5C682MFE5
        3900 63.5*125 0.2 11.5 LHA351M5C392MDC5 10000 89*190 0.2 22.8 LHA451M5C103MFK0
        3900 76.2*85 0.2 10.8 LHA351M5C392ME85 15000 89*270 0.2 32.8 LHA451M5C153MFT0
        5600 63.5*145 0.2 14.7 LHA351M5C562MDE5 500 470 50*60 0.2 2.4 LHA501M5C471MC60
        500 820 50*85 0.2 3.6 LHA501M5C821MC85 525 390 50*60 0.2 2.2 LHA5C1M5C391MC60
        1000 50*105 0.2 4.4 LHA501M5C102MCA5 680 50*85 0.2 3.3 LHA5C1M5C681MC85
        1200 50*125 0.2 5.2 LHA501M5C122MCC5 1000 50*125 0.2 4.8 LHA5C1M5C102MCC5
        1200 63.5*85 0.2 5 LHA501M5C122MD85 1500 63.5*105 0.2 6.2 LHA5C1M5C152MDA5
        1500 50*145 0.2 6.3 LHA501M5C152MCE5 1800 63.5*125 0.2 7.3 LHA5C1M5C182MDC5
        1800 63.5*105 0.2 6.8 LHA501M5C182MDA5 2200 63.5*145 0.2 8.6 LHA5C1M5C222MDE5
        2700 63.5*145 0.2 9.6 LHA501M5C272MDE5 2200 76.2*105 0.2 8.3 LHA5C1M5C222MEA5
        2700 76.2*105 0.2 9.2 LHA501M5C272MEA5 2700 76.2*125 0.2 9.9 LHA5C1M5C272MEC5
        3900 76.2*145 0.2 12.7 LHA501M5C392MEE5 3300 76.2*145 0.2 11.7 LHA5C1M5C332MEE5
        3900 89*125 0.2 11.9 LHA501M5C392MFC5 4700 76.2*190 0.2 14.4 LHA5C1M5C472MEK0
        6800 89*190 0.2 18.8 LHA501M5C682MFK0 4700 89*145 0.2 13.9 LHA5C1M5C472MFE5
        10000 89*270 0.2 26.8 LHA501M5C103MFT0 5600 89*190 0.2 17.1 LHA5C1M5C562MFK0

        ◆ RTED RIPPLE CURRENT MUIERS

        The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following

        ● Frequency Multipliers

        Frequency(HZ) 50 120 300 1K 3K 10K 50K
        10~50VDC 0.95 1.00 1.03 1.05 - 1.09 1.12
        63~80VDC 0.90 1.00 1.06 1.10 - 1.18 1.22
        100~250VDC 0.80 1.00 1.12 1.22 - 1.30 1.33
        350~525VDC 0.80 1.00 1.20 1.50 1.60 - -

        Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

        Previous post:LHR

        Next post:LG

        Global  | NEWS | PRODUCTS | DOWNLOAD | CONTACT

        Copy Right SHENZHEN CAPSUN ELECTRONIC CO.,LTD 粤ICP备12063003号

        Add:Bao'an District, Shenzhen  TEL:+86-755-27299931 FAX:+86-755-33675266 E-mail:sunny@szcapsun.com