Font Size:big  middle  small

        LGR

        Number of visits: Date:2014-8-1 15:44

        LGR series       

        ● High ripple capability than LHA series
        ●Endurance with ripple current:5000hours at 105℃ RoHs compliant。

        ●Applicable to Equipment for manufacturing circuit board,Reflow soldering process equipment,wave soldering equipment,Miniature digital processing equipment, Intelligent power distribution switch,Power quality products, reactive compensation equipments, The associated control devices

        ◆SPECIFIC ATIONS

        items characteristics
        Category temperature Range -25~+85℃
        Rated voltage Range 350~450VDC
        Capacitance Tolerance ± 20%(M)--------------at 20℃/120HZ
        Leakage Current I=0.02CV or 5mA,whichever is smaller
        I: Where, I : Max. leakage current(µA)、C: Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes)
        Dissipation Factor(tanδ) 0.25max -------------------at 20℃/120HZ 
        Low Temperature characteristics Capacitance change C(-25℃)/C(+20℃)≥0.7------------at 20℃/120HZ
        Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
        Insulation Withstanding Voltage When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。
        Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85℃。
        Capacitance change ≤±20% of the initial value
        D.F. (tanδ) ≤200% of the initial specified value
        Leakage current ≤The initial specified value
        Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
        Capacitance change ≤±20% of the initial value
        D.F. (tanδ) ≤150% of the initial specified value
        Leakage current ≤The initial specified value

        SRANDRAD RATINGS

        W.V cap Case sizeD x L tanδ120HZ Rated ripple current(Ams/85℃,120HZ) Part NO.
        [Vdc]  [μF] [mm] 20℃
        350 3300 63.5*115 0.15 14.4 LGR351M5C332MDB5
        3900 63.5*130 0.15 16.6 LGR351M5C392MDD0
        4700 63.5*155 0.15 19.8 LGR351M5C472MDF5
        4700 76.2*115 0.15 19.1 LGR351M5C472MEB5
        5600 63.5*170 0.15 22.5 LGR351M5C562MDH0
        5600 76.2*130 0.15 21.9 LGR351M5C562MED0
        6800 76.2*155 0.15 26.2 LGR351M5C682MEF5
        8200 76.2*170 0.15 30 LGR351M5C822MEH0
        8200 89*155 0.15 29.2 LGR351M5C822MFF5
        10000 89*170 0.15 33.7 LGR351M5C103MFH0
        12000 100*190 0.15 37.8 LGR351M5C123MGK0
        15000 100*250 0.15 47.7 LGR351M5C153MGR0
        400 2700 63.5*115 0.15 13.1 LGR401M5C272MDB5
        3300 63.5*130 0.15 15.2 LGR401M5C332MDD0
        3900 63.5*155 0.15 17.9 LGR401M5C392MDF5
        3900 76.2*115 0.15 18.2 LGR401M5C392MEB5
        4700 63.5*170 0.15 20.5 LGR401M5C472MDH0
        4700 76.2*130 0.15 20.1 LGR401M5C472MED0
        5600 76.2*155 0.15 23.8 LGR401M5C562MEF5
        400 6800 76.2*170 0.15 27.3 LGR401M5C682MEH0
        6800 89*155 0.15 26.6 LGR401M5C682MFF5
        8200 89*170 0.15 30.5 LGR401M5C822MFH0
        10000 100*190 0.15 34.5 LGR401M5C103MGK0
        12000 100*220 0.15 40.2 LGR401M5C123MGN0
        450 2200 63.5*115 0.15 11.8 LGR451M5C222MDB5
        2700 63.5*130 0.15 13.7 LGR451M5C272MDD0
        2700 76.2*115 0.15 14.5 LGR451M5C272MEB5
        3300 63.5*155 0.15 16.5 LGR451M5C332MDF5
        3300 76.2*130 0.15 16.9 LGR451M5C332MED0
        3900 63.5*170 0.15 18.7 LGR451M5C392MDH0
        4700 76.2*155 0.15 21.7 LGR451M5C472MEF5
        5600 76.2*190 0.15 26.1 LGR451M5C562MEK0
        5600 89*155 0.15 24.1 LGR451M5C562MFF5
        6800 89*170 0.15 27.8 LGR451M5C682MFH0
        8200 89*190 0.15 32 LGR451M5C822MFK0
        10000 100*220 0.15 36.8 LGR451M5C103MGN0
        12000 100*250 0.15 42.7 LGR451M5C123MGR0

        In addition, ø 100 products are tentative specifications, please confirm the time of ordering

        ◆ RTED RIPPLE CURRENT MUIERS

        The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following

        ● Frequency Multipliers

        Frequency(HZ)

        120

        300

        1K

        3K

        coefficient

        1.0

        1.1

        1.3

        1.4

        Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

        Previous post:LCS

        Next post:LNB

        Global  | NEWS | PRODUCTS | DOWNLOAD | CONTACT

        Copy Right SHENZHEN CAPSUN ELECTRONIC CO.,LTD 粤ICP备12063003号

        Add:Bao'an District, Shenzhen  TEL:+86-755-27299931 FAX:+86-755-33675266 E-mail:sunny@szcapsun.com