Font Size:big  middle  small

        LHD

        Number of visits: Date:2014-8-1 15:47

        LHD series          

        ●Suitable for soldering machine
        ●After an application of charge-discharge voltage for 30million times Guarantee period
        ●using foreign capacitor design philosophy ,Panasonic branched ammonia salt and the Similar foreign capacitor equivalent
        ●suitabe for Capacitor discharge spot welder Ac spot welder series Automating wire mesh welding

        ●Applicable to welding machine,welder machine,cutting machine,Energy storage machine,mash welder,Intelligent electrostatic discharge generator,pulse generator,Lightning surge generator,Interference simulator,interference generator,Voltage sag generator

        ◆SPECIFIC ATIONS

        items Characteristics
        Category temperature Range -25～+105℃
        Rated voltage Range 350～550VDC
        Capacitance Tolerance ± 20%（M）---------at 20℃/120HZ
        Leakage Current I=0.02CV or 5mA,whichever is smaller
        I: Where, I : Max. leakage current（µA）、C: Nominal capacitance（µF）、Rated voltage (V)at 20℃after 5 minutes)
        Dissipation Factor（tanδ） 0.15max  -------------------    at 20℃/120HZ
        Low Temperature characteristics Rated voltage(vdc) 350to450V 500to550v at 20℃/120HZ
        C（-25℃）/C（+20℃） ≥0.7 ≥0.6
        Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
        Endurance of charge-discharge behavior After an application of charge-discharge voltage for 30million times(charge-discharge voltage difference(△∨)=rated voltage x 0.4,cycle 3HZ)capacitors shell meet the characteristics requirement listed at right at(15℃～35℃)
        Capacitance change ≤±20% of the initial value
        D.F. (tanδ) ≤300% of the initial specified value
        Leakage current ≤The initial specified value
        Appearance There shell be found to remarkable abnormality on the capacitor
        Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
        Capacitance change ≤±20% of the initial value  
        D.F. (tanδ) ≤300% of the initial specified value
        Leakage current ≤The initial specified value

        SRANDRAD RATINGS

        W.V cap Case sizeD x L tanδ120HZ Rated ripple current(Ams/85℃,120HZ） Part NO.
        [Vdc] [μF] [mm] 20℃
        350 1500 50*65 0.15 5.09 LHD351M5C152MC65
        1800 50*75 0.15 5.93 LHD351M5C182MC75
        2200 50*96 0.15 7.3 LHD351M5C222MC96
        2700 50*115 0.15 8.76 LHD351M5C272MCB5
        3300 63.5*85 0.15 9.71 LHD351M5C332MD85
        3900 50*130 0.15 11.1 LHD351M5C392MCD0
        3900 63.5*96 0.15 11.1 LHD351M5C392MD96
        4700 63.5*115 0.15 13.2 LHD351M5C472MDB5
        5600 63.5*130 0.15 15.2 LHD351M5C562MDD0
        5600 76.2*96 0.15 14.3 LHD351M5C562ME96
        6800 76.2*115 0.15 17 LHD351M5C682MEB5
        8200 76.2*130 0.15 19.6 LHD351M5C822MED0
        10000 76.2*155 0.15 23.4 LHD351M5C103MEF5
        12000 89*130 0.15 24.1 LHD351M5C123MFD0
        15000 89*155 0.15 29.1 LHD351M5C153MFF5
        400 1200 50*65 0.15 4.55 LHD401M5C122MC65
        1500 50*75 0.15 5.41 LHD401M5C152MC75
        1800 50*85 0.15 6.26 LHD401M5C182MC85
        2200 50*96 0.15 7.3 LHD401M5C222MC96
        2700 50*115 0.15 8.76 LHD401M5C272MCB5
        3300 63.5*96 0.15 10.2 LHD401M5C332MD96
        3900 63.5*115 0.15 12 LHD401M5C392MDB5
        4700 63.5*130 0.15 13.9 LHD401M5C472MDD0
        4700 76.2*96 0.15 13.1 LHD401M5C472ME96
        5600 63.5*155 0.15 16.5 LHD401M5C562MDF5
        6800 76.2*115 0.15 17 LHD401M5C682MEB5
        8200 76.2*155 0.15 21.2 LHD401M5C822MEF5
        10000 89*130 0.15 22 LHD401M5C103MFD0
        12000 89*155 0.15 26 LHD401M5C123MFF5
        450 1000 50*70 0.15 3.87 LHD451M5C102MC70
        1200 50*75 0.15 4.36 LHD451M5C122MC75
        1500 50*90 0.15 5.28 LHD451M5C152MC90
        1800 50*96 0.15 5.95 LHD451M5C182MC96
        2200 50*130 0.15 7.54 LHD451M5C222MCD0
        2700 63.5*96 0.15 8.34 LHD451M5C272MD96
        450 3300 63.5*115 0.15 9.97 LHD451M5C332MDB5
        3900 63.5*130 0.15 11.4 LHD451M5C392MDD0
        3900 76.2*96 0.15 11.1 LHD451M5C392ME96
        4700 63.5*155 0.15 13.6 LHD451M5C472MDF5
        4700 76.2*115 0.15 13.2 LHD451M5C472MEB5
        5600 76.2*130 0.15 15.2 LHD451M5C562MED0
        6800 76.2*155 0.15 18.1 LHD451M5C682MEF5
        8200 89*130 0.15 19.2 LHD451M5C822MFD0
        500 470 50*60 0.15 2.17 LHD501M5C471MC60
        680 50*65 0.15 2.7 LHD501M5C681MC65
        820 50*75 0.15 3.15 LHD501M5C821MC75
        1000 50*85 0.15 3.67 LHD501M5C102MC85
        1200 50*96 0.15 4.22 LHD501M5C122MC96
        1500 50*115 0.15 5.14 LHD501M5C152MCB5
        1500 63.5*96 0.15 5.42 LHD501M5C152MD96
        1800 50*130 0.15 5.95 LHD501M5C182MCD0
        1800 63.5*96 0.15 5.94 LHD501M5C182MD96
        2200 63.5*115 0.15 7.1 LHD501M5C222MDB5
        2200 76.2*96 0.15 7.3 LHD501M5C222ME96
        2700 63.5*130 0.15 8.31 LHD501M5C272MDD0
        3300 76.2*115 0.15 9.65 LHD501M5C332MEB5
        3900 76.2*130 0.15 11.1 LHD501M5C392MED0
        4700 76.2*155 0.15 13.1 LHD501M5C472MEF5
        6800 89*155 0.15 15.9 LHD501M5C682MFF5
        550 390 50*60 0.15 1.98 LHD551M5C391MC60
        560 50*65 0.15 2.45 LHD551M5C561MC65
        680 50*75 0.15 2.87 LHD551M5C681MC75
        820 50*85 0.15 3.32 LHD551M5C821MC85
        1200 50*115 0.15 4.6 LHD551M5C122MCB5
        1500 63.5*96 0.15 5.42 LHD551M5C152MD96
        1800 76.2*80 0.15 6.12 LHD551M5C182ME80
        2200 76.2*96 0.15 7.3 LHD551M5C222ME96
        2700 76.2*115 0.15 8.73 LHD551M5C272MEB5
        3300 76.2*130 0.15 10.2 LHD551M5C332MED0
        5600 89*155 0.15 14.5 LHD551M5C562MFF5

        ◆ RTED RIPPLE CURRENT MUIERS

        The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following

        ● Frequency Multipliers

        Frequency（HZ） 50 120 300 1K 3K
        coefficient 0.8 1.0 1.1 1.3 1.4

        Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

        Previous post:LXD

        Next post:LLD

        TypeInfo: Bolt type

        Keywords for the information:DC capacitor  Electrolytic capacitor  High voltage capacitor  capacitor manufacturer 

        Global  | NEWS | PRODUCTS | DOWNLOAD | CONTACT

        Copy Right SHENZHEN CAPSUN ELECTRONIC CO.,LTD 粤ICP备12063003号

        Add:Bao'an District, Shenzhen　 TEL：+86-755-27299931 FAX：+86-755-33675266 E-mail:sunny@szcapsun.com