Font Size:big  middle  small

        LD

        Number of visits: Date:2014-8-1 16:50

        LD series  

        ●After an application of charge-discharge voltage for 10million times

        ●Applicable to atm give card back,Start the polysilicon reducing power,
        solar photovoltaic,, Glass fiber, iron and steel metallurgy, petrochemical,
        machinery manufacturing, Nuclear power Etc Equipment,cnc lathe, cnc mill,
        spark tester, Surface grinder, the drilling dynamometer, Machining center machine, Carving machine Etc Equipment

        ◆SPECIFICA TIONS

        Leakage Current I=0.02CV or 5mA,whichever is smaller
        I: Where, I : Max. leakage current(µA)、C: Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes)
        Dissipation Factor(tanδ) 0.25max--------------------------at 20℃/120HZ 
        Low Temperature characteristics Rated voltage(vdc) 350to450V 500to550v at 20℃/120HZ
        C(-25℃)/C(+20℃) ≥0.7 ≥0.6
        Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
        Insulation Withstanding Voltage When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。
        Endurance of charge-discharge After an application of charge-discharge voltage for 10million times(charge-discharge voltage difference(△∨)=rated voltage x 0.3,cycle 3HZ)capacitors shell meet the characteristics requirement listed at right at(15℃~35℃)
        behavior Capacitance change ≤±20% of the initial value
          D.F. (tanδ) ≤300% of the initial specified value
          Leakage current ≤The initial specified value
          Appearance There shell be found to remarkable abnormality on the capacitor
        Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
        Capacitance change ≤±20% of the initial value  
        D.F. (tanδ) ≤300% of the initial specified value
        Leakage current ≤The initial specified value

        SRANDRAD RATINGS

        W.V cap

        Case size

        D x L

        tanδ

        120HZ

        Rated ripple current

        (Ams/85℃,

        120HZ)

        Part NO. W.V cap

        Case size

        D x L

        tanδ

        120HZ

        Rated ripple current

        (Ams/85℃,

        120HZ)

        Part NO.
        [Vdc]   [mm] 20℃ [Vdc] [μF] [mm] 20℃
        350 1500 50*65 0.25 5.09 LD351M5C152MC65 450 3900 63.5*130 0.25 11.4 LD451M5C392MDD0
        1800 50*75 0.25 5.93 LD351M5C182MC75 3900 76.2*96 0.25 11.1 LD451M5C392ME96
        2200 50*96 0.25 7.3 LD351M5C222MC96 4700 63.5*155 0.25 13.6 LD451M5C472MDF5
        2700 50*115 0.25 8.76 LD351M5C272MCB5 4700 76.2*115 0.25 13.2 LD451M5C472MEB5
        3300 63.5*85 0.25 9.71 LD351M5C332MD85 5600 76.2*130 0.25 15.2 LD451M5C562MED0
        3900 50*130 0.25 11.1 LD351M5C392MCD0 6800 76.2*155 0.25 18.1 LD451M5C682MEF5
        3900 63.5*96 0.25 11.1 LD351M5C392MD96 8200 89*130 0.25 19.2 LD451M5C822MFD0
        4700 63.5*115 0.25 13.2 LD351M5C472MDB5 500 470 50*60 0.25 2.17 LD501M5C471MC60
        5600 63.5*130 0.25 15.2 LD351M5C562MDD0 680 50*65 0.25 2.7 LD501M5C681MC65
        5600 76.2*96 0.25 14.3 LD351M5C562ME96 820 50*75 0.25 3.15 LD501M5C821MC75
        6800 76.2*115 0.25 17 LD351M5C682MEB5 1000 50*85 0.25 3.67 LD501M5C102MC85
        8200 76.2*130 0.25 19.6 LD351M5C822MED0 1200 50*96 0.25 4.22 LD501M5C122MC96
        10000 76.2*155 0.25 23.4 LD351M5C103MEF5 1500 50*115 0.25 5.14 LD501M5C152MCB5
        12000 89*130 0.25 24.1 LD351M5C123MFD0 1500 63.5*96 0.25 5.42 LD501M5C152MD96
        15000 89*155 0.25 29.1 LD351M5C153MFF5 1800 50*130 0.25 5.95 LD501M5C182MCD0
        400 1200 50*65 0.25 4.55 LD401M5C122MC65 1800 63.5*96 0.25 5.94 LD501M5C182MD96
        1500 50*75 0.25 5.41 LD401M5C152MC75 2200 63.5*115 0.25 7.1 LD501M5C222MDB5
        1800 50*85 0.25 6.26 LD401M5C182MC85 2200 76.2*96 0.25 7.3 LD501M5C222ME96
        2200 50*96 0.25 7.3 LD401M5C222MC96 2700 63.5*130 0.25 8.31 LD501M5C272MDD0
        2700 50*115 0.25 8.76 LD401M5C272MCB5 3300 76.2*115 0.25 9.65 LD501M5C332MEB5
        3300 63.5*96 0.25 10.2 LD401M5C332MD96 3900 76.2*130 0.25 11.1 LD501M5C392MED0
        3900 63.5*115 0.25 12 LD401M5C392MDB5 4700 76.2*155 0.25 13.1 LD501M5C472MEF5
        4700 63.5*130 0.25 13.9 LD401M5C472MDD0 6800 89*155 0.25 15.9 LD501M5C682MFF5
        4700 76.2*96 0.25 13.1 LD401M5C472ME96 550 390 50*60 0.25 1.98 LD551M5C391MC60
        5600 63.5*155 0.25 16.5 LD401M5C562MDF5 560 50*65 0.25 2.45 LD551M5C561MC65
        6800 76.2*115 0.25 17 LD401M5C682MEB5 680 50*75 0.25 2.87 LD551M5C681MC75
        8200 76.2*155 0.25 21.2 LD401M5C822MEF5 820 50*85 0.25 3.32 LD551M5C821MC85
        10000 89*130 0.25 22 LD401M5C103MFD0 1200 50*115 0.25 4.6 LD551M5C122MCB5
        12000 89*155 0.25 26 LD401M5C123MFF5 1500 63.5*96 0.25 5.42 LD551M5C152MD96
        450 1000 50*70 0.25 3.87 LD451M5C102MC70 1800 76.2*80 0.25 6.12 LD551M5C182ME80
        1200 50*75 0.25 4.36 LD451M5C122MC75 2200 76.2*96 0.25 7.3 LD551M5C222ME96
        1500 50*90 0.25 5.28 LD451M5C152MC90 2700 76.2*115 0.25 8.73 LD551M5C272MEB5
        1800 50*96 0.25 5.95 LD451M5C182MC96 3300 76.2*130 0.25 10.2 LD551M5C332MED0
        2200 50*130 0.25 7.54 LD451M5C222MCD0 5600 89*155 0.25 14.5 LD551M5C562MFF5
        2700 63.5*96 0.25 8.34 LD451M5C272MD96            
        3300 63.5*115 0.25 9.97 LD451M5C332MDB5            

        ◆ RTED RIPPLE CURRENT MUIERS

        The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following

        ● Frequency Multipliers

        Frequency(HZ)

        50

        120

        300

        1K

        3K

        coefficient

        0.8

        1.0

        1.1

        1.3

        1.4

        Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

        Previous post:LLD

        Next post:LWS

        TypeInfo: Bolt type

        Keywords for the information:high voltage ceramic capa  chip capacitors  super capacitors 

        Global  | NEWS | PRODUCTS | DOWNLOAD | CONTACT

        Copy Right SHENZHEN CAPSUN ELECTRONIC CO.,LTD 粤ICP备12063003号

        Add:Bao'an District, Shenzhen  TEL:+86-755-27299931 FAX:+86-755-33675266 E-mail:sunny@szcapsun.com