Font Size:big  middle  small

        LB

        Number of visits: Date:2014-8-1 15:59

        LB series            

         

        ●Endurance with ripple current:2000hours at 85℃
        ●RoHs compliant

        ●Apply to hydraulic line Equipment,Refrigeration and air conditioning equipment,
        solar photovoltaic,Solar thermal,Variable frequency power supply for shore,
        uninterrupted power supply,Inverter

        items characteristics
        Category temperature Range -40~+85℃(10-600VDC)
        Rated voltage Range 10~600VDC
        Capacitance Tolerance ± 20%(M)----------20℃/120HZ
        Leakage Current I=0.02CV or 5mA,whichever is smaller
        I: Where, I : Max. leakage current(µA)、C:Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes)
        Dissipation Factor(tanδ) Shall not exceed the values shown in the standard ratings -------------- 20℃/120HZ
        Low Temperature characteristics Capacitance change C(-25℃)/C(+20℃)≥0.7 ------------- 20℃/120HZ
        Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
        Insulation Withstanding Voltage When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。
        Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85℃。
        Capacitance change ≤±20% of the initial value  
        D.F. (tanδ) ≤200% of the initial specified value
        Leakage current ≤The initial specified value
        Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
        Capacitance change ≤±20% of the initial value  
        D.F. (tanδ) ≤150% of the initial specified value
        Leakage current ≤The initial specified value

        SRANDRAD RATINGS

        W.V cap

        Case size

        D x L

        tanδ 120HZ

        Rated ripple current

        (Ams/85℃,

        120HZ)

        Part NO. W.V cap

        Case size

        D x L

        tanδ 120HZ

        Rated ripple current

        (Ams/85℃,

        120HZ)

        Part NO.
        [Vdc]   [mm] 20℃ [Vdc] [μF] [mm] 20℃
        10 39000 35*50 0.6 4.7 LB100M5B393MA50 35 150000 63.5*100 0.7 14 LB350M5C154MDA0
        82000 35*80 0.6 7.4 LB100M5B823MA80 18000 63.5*120 0.7 16.6 LB350M5C184MDC0
        100000 35*100 0.7 8 LB100M5B104MAA0 220000 76.2*100 0.75 17.3 LB350M5C224MEA0
        120000 35*120 0.7 9.4 LB100M5B124MAC0 270000 76.2*120 0.8 19.8 LB350M5C274MEC0
        150000 50*80 0.9 9.8 LB100M5C154MC80 330000 76.2*140 0.9 22.5 LB350M5C334MEE0
        220000 50*100 1 12.1 LB100M5C224MCA0 470000 89*140 1 28.3 LB350M5C474MFE0
        270000 50*120 1.2 13.6 LB100M5C274MCC0 50 10000 35*50 0.25 4.1 LB500M5B103MA50
        390000 63.5*100 1.5 15.3 LB100M5C394MDA0 18000 35*80 0.25 5.2 LB500M5B183MA80
        470000 63.5*120 2 16 LB100M5C474MDC0 22000 35*100 0.3 5.9 LB500M5B223MAA0
        560000 76.2*100 2.5 17.3 LB100M5C564MEA0 27000 35*120 0.35 6.6 LB500M5B273MAC0
        680000 76.2*120 3 18.7 LB100M5C684MEC0 39000 50*80 0.4 7.4 LB500M5C393MC80
        16 27000 35*50 0.45 4.2 LB160M5B273MA50 56000 50*100 0.4 9.8 LB500M5C563MCA0
        56000 35*80 0.6 6.5 LB160M5B563MA80 68000 50*120 0.45 11.1 LB500M5C683MCC0
        82000 35*100 0.7 8 LB160M5B823MAA0 82000 63.5*100 0.5 12.2 LB500M5C823MDA0
        100000 35*120 0.7 9.6 LB160M5B104MAC0 120000 63.5*120 0.5 16 LB500M5C124MDC0
        120000 50*80 0.8 9.6 LB160M5C124MC80 150000 76.2*120 0.6 18.1 LB500M5C154MEC0
        150000 50*100 0.9 11.2 LB160M5C154MCA0 180000 76.2*140 0.7 19.5 LB500M5C184MEE0
        220000 50*120 1 14.2 LB160M5C224MCC0 270000 89*140 0.8 24.6 LB500M5C274MFE0
        270000 63.5*100 1.2 15.3 LB160M5C274MDA0 63 5600 35*50 0.2 3 LB630M5B562MA50
        330000 63.5*120 1.3 17.1 LB160M5C334MDC0 10000 35*80 0.25 4 LB630M5B103MA80
        390000 76.2*100 1.6 18 LB160M5C394MEA0 15000 35*100 0.25 5.3 LB630M5B153MAA0
        470000 76.2*120 1.8 19.3 LB160M5C474MEC0 18000 35*120 0.25 6.2 LB630M5B183MAC0
        560000 76.2*140 2 20.7 LB160M5C564MEE0 22000 50*80 0.3 6.5 LB630M5C223MC80
        25 18000 35*50 0.35 4 LB250M5B183MA50 33000 50*100 0.35 8.1 LB630M5C333MCA0
        39000 35*80 0.4 6.2 LB250M5B393MA80 39000 50*120 0.35 9.6 LB630M5C393MCC0
        47000 35*100 0.4 7.4 LB250M5B473MAA0 47000 63.5*100 0.4 10.2 LB630M5C473MDA0
        56000 35*120 0.45 8.3 LB250M5B563MAC0 68000 63.5*120 0.4 13.3 LB630M5C683MDC0
        82000 50*80 0.5 9.7 LB250M5C823MC80 100000 76.2*120 0.45 17.1 LB630M5C104MEC0
        100000 50*100 0.6 10.8 LB250M5C104MCA0 120000 76.2*140 0.5 19 LB630M5C124MEE0
        120000 50*120 0.6 12.8 LB250M5C124MCC0 150000 89*140 0.55 22 LB630M5C154MFE0
        180000 63.5*100 0.75 14.7 LB250M5C184MDA0 80 3300 35*50 0.15 2.5 LB800M5B332MA50
        220000 63.5*120 0.8 16.8 LB250M5C224MDC0 6800 35*80 0.2 3.7 LB800M5B682MA80
        270000 76.2*100 0.9 18.3 LB250M5C274MEA0 10000 35*100 0.2 4.9 LB800M5B103MAA0
        330000 76.2*120 1 20.7 LB250M5C334MEC0 12000 35*120 0.2 5.4 LB800M5B123MAC0
        390000 76.2*140 1.2 22.1 LB250M5C394MEE0 15000 50*80 0.25 6 LB800M5C153MC80
        560000 89*140 1.5 25.8 LB250M5C564MFE0 22000 50*100 0.3 7.1 LB800M5C223MCA0
        35 15000 35*50 0.3 3.9 LB350M5B153MA50 27000 50*120 0.3 8.6 LB800M5C273MCC0
        33000 35*80 0.4 6 LB350M5B333MA80 33000 63.5*100 0.35 9.3 LB800M5C333MDA0
        39000 35*100 0.4 7 LB350M5B393MAA0 47000 63.5*120 0.35 12 LB800M5C473MDC0
        47000 35*120 0.45 8 LB350M5B473MAC0 68000 76.2*120 0.35 15.4 LB800M5C683MEC0
        68000 50*80 0.5 9 LB350M5C683MC80 82000 76.2*140 0.35 18.1 LB800M5C823MEE0
        82000 50*100 0.55 10.3 LB350M5C823MCA0 100000 89*140 0.4 21 LB800M5C104MFE0
        120000 50*120 0.6 12.8 LB350M5C124MCC0 150000 89*220 0.5 21.04 LB800M5C154MFN0
        100 2200 35*50 0.1 2.5 LB101M5B222MA50 250 1500 35*100 0.25 8.7 LB251M5B152MAA0
        4700 35*80 0.15 3.4 LB101M5B472MA80 1800 35*100 0.25 9.5 LB251M5B182MAA0
        6800 35*100 0.15 4.2 LB101M5B682MAA0 2200 50*75 0.25 10.8 LB251M5C222MC75
        8200 35*120 0.15 5 LB101M5B822MAC0 2700 50*75 0.25 12 LB251M5C272MC75
        10000 50*80 0.2 5.2 LB101M5C103MC80 3300 50*96 0.25 14.6 LB251M5C332MC96
        18000 50*120 0.2 8.1 LB101M5C183MCC0 3900 50*115 0.25 17 LB251M5C392MCB5
        22000 63.5*100 0.25 8.6 LB101M5C223MDA0 4700 63.5*96 0.25 19.2 LB251M5C472MD96
        27000 63.5*120 0.25 10.3 LB101M5C273MDC0 5600 63.5*96 0.25 21 LB251M5C562MD96
        33000 76.2*100 0.25 11.1 LB101M5C333MEA0 6800 63.5*115 0.25 24.7 LB251MC682MDB5
        39000 76.2*120 0.25 12.4 LB101M5C393MEC0 8200 63.5*115 0.25 27.1 LB251M5C822MDB5
        47000 76.2*140 0.25 14.3 LB101M5C473MEE0 10000 63.5*130 0.25 31.5 LB251M5C103MDD0
        68000 89*140 0.3 18 LB101M5C683MFE0 12000 76.2*115 0.25 34.8 LB251M5C123MEB5
        160 3300 35*120 0.25 14 LB161M5B332MAC0 15000 76.2*130 0.25 40.8 LB251M5C153MED0
        3900 50*75 0.25 14.4 LB161M5C392MC75 18000 76.2*155 0.25 47.8 LB251M5C183MEF5
        4700 50*75 0.25 15.8 LB161M5C472MC75 20000 89*155 0.25 56.5 LB251M5C223MFF5
        5600 50*96 0.25 19 LB161M5C562MC96 350 390 35*50 0.2 4.5 LB351M5B391MA50
        6800 50*96 0.25 21 LB161M5C682MC96 470 35*85 0.2 5.8 LB351M5B471MA85
        8200 50*115 0.25 24.7 LB161M5C822MCB5 560 35*85 0.2 6.4 LB351M5B561MA85
        10000 63.5*96 0.25 28 LB161M5C103MD96 680 35*85 0.2 7 LB351M5B681MA85
        12000 63.5*96 0.25 30.6 LB161M5C123MD96 820 35*100 0.2 8.3 LB351M5B821MAA0
        15000 63.5*130 0.25 38.6 LB161M5C153MDD0 1000 35*100 0.2 9.2 LB351M5B102MAA0
        18000 63.5*130 0.25 42.2 LB161M5C183MDD0 1200 50*75 0.2 10.3 LB351M5C122MC75
        22000 76.2*130 0.25 49.4 LB161M5C223MED0 1500 50*75 0.2 11.5 LB351M5C152MC75
        27000 76.2*130 0.25 54.7 LB161M5C273MED0 1800 50*96 0.2 13.9 LB351M5C182MC96
        33000 89*130 0.25 64.2 LB161M5C333MFD0 2200 50*96 0.2 15.4 LB351M5C222MC96
        39000 89*155 0.25 75.3 LB161M5C393MFF5 2700 50*130 0.2 19.3 LB351M5C272MCD0
        200 2200 35*100 0.25 10.6 LB201M5B222MAA0 3300 50*130 0.2 21.4 LB351M5C332MCD0
        2700 35*120 0.25 12.7 LB201M5B272MAC0 3900 63.5*115 0.2 24.2 LB351M5C392MDB5
        3300 50*75 0.25 13.3 LB201M5C332MC75 4700 63.5*130 0.2 27.9 LB351M5C472MDD0
        3900 50*75 0.25 14.4 LB201M5C392MC75 5600 76.2*115 0.2 30.7 LB351M5C562MEB5
        4700 50*96 0.25 17.4 LB201M5C472MC96 6800 76.2*130 0.2 35.4 LB351M5C682MED0
        5600 50*115 0.25 20.4 LB201M5C562MCB5 8200 76.2*155 0.2 41.7 LB351M5C822MEF5
        6800 50*130 0.25 23.7 LB201M5C682MCD0 10000 89*155 0.2 49 LB351M5C103MFF5
        8200 63.5*96 0.25 25.4 LB201M5C822MD96 12000 89*155 0.2 54.1 LB351M5C123MFF5
        10000 63.5*96 0.25 28 LB201M5C103MD96 15000 89*189 0.2 66.2 LB351M5C153MFK0
        12000 76.2*96 0.25 32.6 LB201M5C123ME96 18000 89*220 0.2 77.9 LB351M5C183MFN0
        15000 76.2*96 0.25 39 LB201M5C153ME96 400 330 35*50 0.2 4.1 LB401M5B331MA50
        18000 76.2*130 0.25 44.6 LB201M5C183MED0 390 35*85 0.2 5.3 LB401M5B391MA85
        22000 76.2*155 0.25 53 LB201M5C223MEF5 470 35*85 0.2 5.8 LB401M5B471MA85
        27000 89*130 0.25 58.2 LB201M5C273MFD0 560 35*85 0.2 6.4 LB401M5B561MA85
        33000 89*155 0.25 69 LB201M5C333MFF5 680 35*100 0.2 7.6 LB401M5B681MAA0
        36000 89*189 0.25 76 LB201M5C363MFK0 820 35*100 0.2 8.3 LB401M5B821MAA0
        39000 89*220 0.25 82 LB201M5C393MFN0 1000 50*75 0.2 9.4 LB401M5C102MC75
        400 1200 50*75 0.2 10.3 LB401M5C122MC75 500 1200 50*115 0.2 12.2 LB501M5C122MCB5
        1500 50*96 0.2 12.7 LB401M5C152MC96 63.5*96 0.2 12.5 LB501M5C122MD96
        1800 50*96 0.2 13.9 LB401M5C182MC96 1500 50*130 0.2 14.3 LB501M5C152MCD0
        2200 50*130 0.2 17.4 LB401M5C222MCD0 63.5*96 0.2 13.9 LB501M5C152MD96
        2700 63.5*96 0.2 18.8 LB401M5C272MD96 1800 63.5*115 0.2 16.4 LB501M5C182MDB5
        3300 63.5*115 0.2 22.2 LB401M5C332MDB5 2200 63.5*130 0.2 19 LB501M5C222MDD0
        3900 63.5*130 0.2 25.4 LB401M5C392MDD0 2700 76.2*115 0.2 21.3 LB501M5C272MEB5
        4700 76.2*115 0.2 28.2 LB401M5C472MEB5 3300 76.2*130 0.2 24.6 LB501M5C332MED0
        5600 76.2*130 0.2 32.2 LB401M5C562MED0 3900 76.2*155 0.2 28.7 LB501M5C392MEF5
        6800 76.2*155 0.2 38 LB401M5C682MEF5 4700 76.2*170 0.2 32.9 LB501M5C472MEH0
        8200 89*155 0.2 44.4 LB401M5C822MFF5 89*130 0.2 31.4 LB501M5C472MFD0
        10000 89*155 0.2 49.4 LB401M5C103MFF5   76.2*189 0.2 37.8 LB501M5C562MEK0
        12000 89*189 0.2 59.1 LB401M5C123MFK0 5600 89*155 0.2 36.7 LB501M5C562MFF5
        15000 89*220 0.2 71.1 LB401M5C153MFN0 6800 89*170 0.2 41.8 LB501M5C682MFF5
        450 270 35*50 0.2 3.7 LB451M5B271MA50 8200 89*189 0.2 48.5 LB501M5C822MFK0
        330 35*85 0.2 4.9 LB451M5B331MA85 100*170 0.2 47.1 LB501M5C822MGH0
        390 35*85 0.2 5.3 LB451M5B391MA85 10000 89*220 0.2 57.9 LB501M5C103MFN0
        470 35*85 0.2 5.8 LB451M5B471MA85 100*189 0.2 54.3 LB501M5C103MGK0
        560 35*100 0.2 6.9 LB451M5B561MAA0 12000 100*220 0.2 64.1 LB501M5C123MGN0
        680 35*100 0.2 7.6 LB451M5B681MAA0 600 1200 63.5*96 0.2 6.7 LB601M5C122MD96
        820 50*75 0.2 8.6 LB451M5C821MC75 1500 63.5*115 0.2 8.1 LB601M5C152MDB5
        1000 50*75 0.2 9.4 LB451M5C102MC75 1800 76.2*96 0.2 8.8 LB601M5C182ME96
        1200 50*96 0.2 11.4 LB451M5C122MC96 2200 76.2*115 0.2 10.4 LB601M5C222MEB5
        1500 50*115 0.2 13.7 LB451M5C152MCB5 2700 76.2*130 0.2 12.1 LB601M5C272MED0
        1800 50*130 0.2 15.8 LB451M5C182MCD0 3300 89*130 0.2 14.3 LB601M5C332MFD0
        2200 63.5*96 0.2 17 LB451M5C222MD96 4700 89*155 0.2 18.3 LB601M5C472MFF5
        2700 63.5*115 0.2 20.2 LB451M5C272MDB5  
        3300 63.5*130 0.2 23.4 LB451M5C332MDD0
        3900 76.2*115 0.2 25.6 LB451M5C392MEB5
        4700 76.2*130 0.2 29.4 LB451M5C472MED0
        5600 76.2*155 0.2 34.6 LB451M5C562MEF5
        6800 89*155 0.2 40.5 LB451M5C682MFF5
        8200 89*155 0.2 44.6 LB451M5C822MFF5
        10000 89*189 0.2 53.9 LB451M5C103MFK0
        12000 89*220 0.2 63.8 LB451M5C123MFN0
        ♦rated ripple current multipliers    ●frequency multipliers
        Rated voltage Case diameter Frequency(HZ)
        50 120 300 1K 10K 50K
        10~50 Ø35~Ø89 0.95 1 1.03 1.05 1.09 1.12
        63~80 Ø50~Ø89
        100 Ø65~Ø89
        63~80 Ø35 0.9 1 1.06 1.1 1.18 1.22
        100 Ø50
        100 Ø35 0.82 1 1.12 1.22 1.3 1.33

        The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced

        TypeInfo: Bolt type

        Keywords for the information:capacitors  high voltage capacitor  capacitor vishay  esr capacitor 

        Global  | NEWS | PRODUCTS | DOWNLOAD | CONTACT

        Copy Right SHENZHEN CAPSUN ELECTRONIC CO.,LTD 粤ICP备12063003号

        Add:Bao'an District, Shenzhen  TEL:+86-755-27299931 FAX:+86-755-33675266 E-mail:sunny@szcapsun.com