Your present location:INDEX >> NEWS >> Board independence type capacitor >> CDF
 
Service Hotline
Domestic sales 0755-27299931 Foreign sales 0086-0755-33675265
0086-0755-27299961
0086-0755-33675266 Authorized dealers
 

CDF

Date:2014-09-29 17:06

CDF Series

 

Apply totraffic lights, Navigation lights, Automobile headlamp, Obstruction light, strobe lights roof warning light, High speed flash, Traffic speed flash, HD Bayonet,Electronic police red light violation Capture flash, Stage a strobe light etc;

Laser cosmetic instrument ,IPL Hair removal skin rejuvenation,E light beauty instrument,Prostate therapeutic instrument, Electronic medical pulse, Electron accelerator;

△∨=150V charge and discharge 30000000 time;

Electrolytic capacitors fro rapid strobe flash applications ,long life under rapid charge and discharge use;

Can immediately discharge or completely clean discharge, Special requirements, pulse width is more than 0.3ms, the size of the pulse current can be correspondingly adjusted automatically。

SPECIFIC ATIONS

items characteristics
Category temperature Range -40~+105℃
Rated voltage Range 330V~500V
Capacitance Tolerance ±5% 20℃、120HZ
Leakage Current I=1Xc(After 5 minutes application of voltage)
I: Where, I : Max. leakage current(µA)、C: Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes) 
Dissipation Factor(MAX) Rated capacitance(µF) 30~600µF 601~2500µF 20℃、120HZ
tanδ 0.07 0.10
charge and discharge Charge and discharge at rated voltage at 15~35℃ in every 1seconds for 30000000times via Xe flash tube with discharge resistanceof0.7~1.0Ω
Charging voltage Rated voltage  
discharge voltage Rated voltage≤0.3
Charge and discharge frequency see listing
Charge and discharge resistor see listing
Capacitance change ≤±20% of the initial value
D.F. (tanδ) ≤200% of the initial specified value
Leakage current ≤The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
Capacitance change ≤±20% of the initial value
D.F. (tanδ) ≤200% of the initial specified value
Leakage current ≤The initial specified value

Snap-in type
Capacity Voltage ESR Leakage current Size   Capacity Voltage ESR Leakage current Size
(µF) (Vdc) (Ω)120HZ (µA) (mm) (µF) (Vdc) (Ω)120HZ (µA) (mm)
220 330 0.469 220 22×30 220 360 0.41 220 30×35
300 330 0.663 300 25×35 250 360 0.37 250 25×50
300 330 0.663 300 30×25 300 360 0.31 300 30×35
350 330 0.568 350 25×40 330 360 0.31 330 30×35
350 330 0.568 350 30×30 470 360 0.21 470 30×45
400 330 0.497 400 25×40 680 360 0.21 680 35×50
400 330 0.497 400 30×30 820 360 0.18 820 35×55
500 330 0.398 500 25×50 1000 360 0.14 1000 35×60
500 330 0.398 500 30×35 1200 360 0.12 1200 35×65
600 330 0.332 600 30×40 1200 360 0.12 1200 40×60
700 330 0.284 700 35×40 1800 360 0.11 1800 35×75
800 330 0.249 800 35×40 1800 360 0.11 1800 40×65
900 330 0.221 900 35×50 2200 360 0.1 2200 35×75
900 330 0.199 900 35×45 2200 360 0.1 2200 40×70
1000 330 0.199 1000 35×50 2500 360 0.08 2500 35×80
1000 330 0.166 1000 40×40 2500 360 0.08 2500 40×75
1200 330 0.166 1200 35×50 30 450 3.07 30 25×25
1500 330 0.133 1500 35×63 40 450 2.3 40 22×40
2000 330 0.099 2000 35×80 50 450 1.84 50 25×35
2700 330 0.074 2700 40×80 60 450 1.54 60 25×40
50 360 1.92 48 25×25 80 450 1.15 80 25×50
60 360 1.54 60 25×30 100 450 1.08 100 30×40
80 360 1.15 80 25×35 120 450 0.77 120 30×50
100 360 0.92 100 25×40 150 450 0.61 150 35×50
120 360 0.77 120 30×30 180 450 0.52 180 35×60
150 360 0.61 150 25×50 220 450 0.45 220 35×65
200 360 0.46 200 30×50 330 450 0.32 330 35×70
screw/lug/5pin
Capacity Voltage ESR Leakage current Size   Capacity Voltage ESR Leakage current Size
(µF) (Vdc) (Ω)120HZ (µA) (mm) (µF) (Vdc) (Ω)120HZ (µA) (mm)
600 500 0.332 600 35×92 1300 500 0.153 1300 50×120
800 500 0.249 800 35×115 1600 500 0.124 1600 50×135
900 500 0.221 900 50×80 1700 500 0.117 1700 50×150
1000 500 0.199 1000 50×100 2100 500 0.095 2100 50×160
1200 500 0.166 1200 50×120 2500 500 0.072 2500 50×180

capsun flash series
1、SPF over voltage is only 330WV, this year added 310V, 360V two kinds of voltage. Because of particularity of camera design. Especially digital camera size thinner, smaller and smaller, if the guests have special or super small size requirements,  For the details, please contact representative of capsun;
2、capsun SPF series, CDF series for studio, digital camera, professional photographic equipment, flash capacitor。Before the flash capacitor installation ways mainly have the lead type, lug type,Now added can be installed in many ways, for example(snap-in type、long lug type, Multi pin type ,screw type);
For example:Highway bayonet shooting,Infrared security bayonet,Field pulse signal,Laser pulse power,Also taking into account the larger current,use Screw type Installation For example, 2500 μ F360WV diameter 50mm, height 75mm flash capacitos。
3、capsun  Electronics SPF、CDF series long life under rapid charge and discharge use Widely used in traffic lights,apply totraffic lights, Navigation lights, Automobile headlamp, Obstruction light, strobe lights roof warning light, High speed flash, Traffic speed flash, HD Bayonet,Electronic police red light violation Capture flash, Stage a trobe light etc Laser cosmetic instrument IPL hair removal skin rejuvenation E light beauty instrument Prostate therapeutic instrument Electronic medical pulse
Electron accelerator etc,Flash life (charge discharge according to 0.3WV) 30000000 time,For special products,The life span of a 100 million times;For example, 50 μ F360V can also be used in special boost circui. Adopt the lastest struct 6ure design of capsun, adopt the electrolyte system from MATSUSHITA,suitable for high ripple and high current circuit, with better performance than CDF series of RUBYCON,The electrical parameters of the total beyond peer
4、A、Because SPF and CDF are special capacitor,So the product approval, there will be a unique code to the guests;B. Because of the difference between the circuit of charge and discharge of the discharge, sometimes need to ask for the circuit diagram of Because of thedifference between the circuit of charge and discharge of the discharge ,sometimes need to ask for the circuit diagram,As a reference design;
SPF for 2-4 times / sec ,spec 360WV, 400WV, 450WV, Apply to rising voltage circuit closed loop
CDF for ≧5 times/sec, Highest 11 times / sec,spec360WV、450WV,500WV Apply to rising voltage circuit closed loop, Can immediately discharge or completely clean discharge, Special requirements, pulse width is more than 0.3ms, the size of the pulse current can be correspondingly adjusted automatically
charge and discharge projects:
A DC voltage charging and AC voltage charging and Discharge for the flash tube type high pressure xenon lamp
5、Suitable for high ripple circuit, with life of over 30 million times or guarantee period of 5 years, adopt design from and abroad electrolyte system from MATSUSHITA with parameter better than abroad CAPACITOR
Note: the flash capacitor The Life And Charge discharge Frequency relationship,And Capacitor The Parallel circuit Circuit closed loop same relationship,and charge discharge Frequency ESR same relationship.
 

Previous post:CS2

Next post:SPF

TypeInfo: Board independence type capacitor

Keywords for the information:CDF Series capacitor  traffic lights capacitor  HD Bayonet capacitor  capacitor pol