Your present location:INDEX >> NEWS >> Bolt type >> LHR
 
Service Hotline
Domestic sales 0755-27299931 Foreign sales 0086-0755-33675265
0086-0755-27299961
0086-0755-33675266 Authorized dealers
 

LHR

Date:2014-08-02 17:44

LHR series         

● Endurance with ripple current:5000hours at 85℃
●Rated voltage range:350to450vdc,capacitance 680to18000µF
●Improved the resistance for charge and discharge from same dimension of LG series
●For frequently change of regenerative voltage from AC servo amplifier and inverter control.Electricity Giddy Machine. digital a transmitter circuit. supersonic (waves)

◆SPECIFIC ATIONS

items

Characteristics

Category temperature Range

-40~+85℃

Rated voltage Range

350~450VDC

Capacitance Tolerance

± 20%(M) ------------------at 20℃/120HZ

Leakage Current

I=0.02CV or 5mA,whichever is smaller
I: Where, I : Max. leakage current(µA)、C: Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes)

Dissipation Factor(tanδ)

≤0.20  -------------- at 20℃/120HZ

Low Temperature  characteristics

Capacitance change(vdc) C(-25℃)/C(+20℃)≥0.7 -------------- at 20℃/120HZ

Insulation Resistance

When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ

Insulation Withstanding Voltage

When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。

Charge and Discharge

The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to charge and discharge test with the voltage waveform shown below at room temperature(15to35℃)

Capacitance change

≤±20% of the initial value

Voltage waveform:

D.F. (tanδ)

≤300% of the initial specified value

Leakage current

≤The initial specified value

Frequency

3HZ

Number of cycle

60 million times

Endurance

The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not

Capacitance change

≤±20% of the initial value

exceed the rated voltage) for 2,000 hours at 85℃。

D.F. (tanδ)

≤200% of the initial specified value

Leakage current

≤The initial specified value

Shelf Life

The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without voltage applied. Before the measurement,

Capacitance change

≤±20% of the initial value

the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4

D.F. (tanδ)

≤200% of the initial specified value

Leakage current

≤The initial specified value

SRANDRAD RATINGS

W.V cap Case sizeD x L tanδ120HZ,20℃ Rated ripple current(Ams/85℃,120HZ) Part NO.
[Vdc] [μF] [mm] [mΩ]
350 1200 50*60 4.7 1.56 LHR351M5C122MC60
1500 50*70 5.5 1.83 LHR351M5C152MC70
1800 50*80 6.4 2.13 LHR351M5C182MC80
2200 50*96 7.6 2.53 LHR351M5C222MC96
2700 50*105 8.8 2.94 LHR351M5C272MCA5
2700 50*115 9.2 3.06 LHR351M5C272MCB5
3300 50*130 10.8 3.58 LHR351M5C332MCD0
4700 63.5*115 13.2 4.61 LHR351M5C472MDB5
5600 63.5*130 15.2 5.3 LHR351M5C562MDD0
5600 76.2*105 15.2 5.36 LHR351M5C562MEA5
6800 63.5*155 18.1 6.32 LHR351M5C682MDF5
8200 63.5*170 20.7 7.25 LHR351M5C822MDH0
8200 76.2*130 20.2 6.57 LHR351M5C822MED0
10000 76.2*155 24.2 8.47 LDX351M5C103MEF5
10000 89*115 23.1 8.1 LHR351M5C103MFB5
12000 76.2*170 27.6 9.66 LHR351M5C123MEH0
12000 89*130 26.6 9.33 LHR351M5C123MFD0
15000 89*155 32.1 11.2 LHR351M5C153MFF5
15000 89*170 33.5 11.7 LHR351M5C153MFH0
18000 89*190 38.5 13.5 LHR351M5C183MFK0
375 1000 50*60 4.3 1.42 LHR3H1M5C102MC60
1200 50*70 4.9 1.64 LHR3H1M5C122MC70
1500 50*80 5.8 1.94 LHR3H1M5C152MC80
2200 50*96 7.6 2.54 LHR3H1M5C222MC96
2200 50*105 8 2.65 LHR3H1M5C222MCA5
2700 50*115 9.2 3.06 LHR3H1M5C272MCB5
3300 50*130 10.8 3.58 LHR3H1M5C332MCD0
4700 63.5*115 13.2 4.61 LHR3H1M5C472MDB5
5600 63.5*130 15.2 5.3 LHR3H1M5C562MDD0
5600 76.2*105 15.2 5.36 LHR3H1M5C562MEA5
6800 63.5*155 18.1 6.32 LHR3H1M5C682MDF5
6800 63.5*170 18.9 6.6 LHR3H1M5C682MDH0
8200 76.2*130 20.2 7.09 LHR3H1M5C822MED0
8200 89*115 20.9 7.35 LHR3H1M5C822MFB5
375 10000 76.2*155 24.2 8.48 LHR3H1M5C103MEF5
10000 76.2*170 25.2 8.85 LHR3H1M5C103MEH0
10000 89*130 24.3 8.54 LHR3H1M5C103MFD0
12000 89*155 28.4 10 LHR3H1M5C123MFF5
15000 89*170 33.5 11.7 LHR3H1M5C153MFH0
15000 89*190 35.2 12.3 LHR3H1M5C153MFK0
400 1000 50*60 4.3 1.42 LHR401M5C102MC60
1200 50*70 4.9 1.64 LHR401M5C122MC70
1500 50*80 5.8 1.95 LHR401M5C152MC80
1800 50*96 6.9 2.29 LHR401M5C182MC96
2200 50*105 8 2.65 LHR401M5C222MCA5
2200 50*115 8.3 2.77 LHR401M5C222MCB5
2700 50*130 9.8 3.23 LHR401M5C272MCD0
3900 63.5*115 12 4.21 LHR401M5C392MDB5
4700 63.5*130 13.9 4.86 LHR401M5C472MDD0
5600 63.5*155 16.4 5.75 LHR401M5C562MDF5
5600 63.5*170 17.1 5.99 LHR401M5C562MDH0
5600 76.2*105 15.2 5.35 LHR401M5C562MEA5
6800 76.2*130 18.4 6.47 LHR401M5C682MED0
8200 76.2*155 21.9 7.68 LHR401M5C822MEF5
8200 76.2*170 22.8 8.02 LHR401M5C822MEH0
8200 89*115 20.9 7.35 LHR401M5C822MFB5
10000 89*130 24.3 8.26 LHR401M5C103MFD0
12000 89*155 28.7 10 LHR401M5C123MFF5
12000 89*170 29.9 10.5 LHR401M5C123MFH0
15000 89*190 31.2 12.3 LHR401M5C153MFK0
420 820 50*60 3.8 1.29 LHR421M5C821MC60
1000 50*70 4.4 1.5 LHR421M5C102MC70
1200 50*80 5.2 1.75 LHR421M5C122MC80
1800 50*96 6.8 2.3 LHR421M5C182MC96
1800 50*105 7.1 2.4 LHR421M5C182MCA5
2200 50*115 8.2 2.77 LHR421M5C222MCB5
2700 50*130 9.6 3.25 LHR421M5C272MCD0
3300 63.5*115 11 3.87 LHR421M5C332MDB5
3900 63.5*130 12.7 4.44 LHR421M5C392MDD0
4700 63.5*155 15 5.28 LHR421M5C472MDF5
4700 76.2*105 13.9 4.92 LHR421M5C472MEA5
5600 63.5*170 17.1 6.02 LHR421M5C562MDH0
5600 76.2*130 16.6 5.9 LHR421M5C562MED0
6800 76.2*155 19.8 7.02 LHR421M5C682MEF5
6800 89*115 19 6.73 LHR421M5C682MFB5
8200 76.2*170 22.7 8.04 LHR421M5C822MEH0
8200 89*130 22 7.78 LHR421M5C822MFD0
10000 89*155 26.2 9.24 LHR421M5C103MFF5
12000 89*170 29.9 10.5 LHR421M5C123MFH0
12000 89*190 31.5 11 LHR421M5C123MFK0
450 680 50*60 3.1 1.03 LHR451M5C681MC60
820 50*60 3.8 1.29 LHR451M5C821MC60
1000 50*70 4.4 1.5 LHR451M5C102MC70
1200 50*80 5.2 1.74 LHR451M5C122MC80
1500 50*96 6.2 2.1 LHR451M5C152MC96
1800 50*115 7.4 2.51 LHR451M5C182MCB5
2200 50*130 8.7 2.93 LHR451M5C222MCD0
3300 63.5*115 11 3.88 LHR451M5C332MDB5
3900 63.5*130 12.7 4.44 LHR451M5C392MDD0
3900 76.2*105 13.2 4.49 LHR451M5C392MEA5
4700 63.5*155 15 5.27 LHR451M5C472MDF5
4700 63.5*170 15.6 5.5 LHR451M5C472MDH0
5600 76.2*130 16.6 5.88 LHR451M5C562MED0
6800 76.2*155 19.8 7.04 LHR451M5C682MEF5
6800 89*115 19 6.72 LHR451M5C682MFB5
8200 76.2*170 22.7 7.97 LHR451M5C822MEH0
8200 89*130 22 7.72 LHR451M5C822MFD0
10000 89*155 26.2 9.22 LHR451M5C103MFF5
10000 89*170 27.3 9.66 LHR451M5C103MFH0
12000 89*190 31.5 11.1 LHR451M5C123MFK0

◆ RTED RIPPLE CURRENT MUIERS

The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following

● Frequency Multipliers

Frequency(HZ) 50 120 300 1K 3K
coefficient 0.8 1.0 1.1 1.3 1.4

Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

Previous post:LHC

Next post:LHA

TypeInfo: Bolt type

Keywords for the information:LHR series capacitor  Chargedischarge capacitor  Electric welder capacitor  capacitor