Your present location:INDEX >> NEWS >> Bolt type >> LGR
 
Service Hotline
Domestic sales 0755-27299931 Foreign sales 0086-0755-33675265
0086-0755-27299961
0086-0755-33675266 Authorized dealers
 

LGR

Date:2014-08-01 15:44

LGR series       

● High ripple capability than LHA series
●Endurance with ripple current:5000hours at 105℃ RoHs compliant。

●Applicable to Equipment for manufacturing circuit board,Reflow soldering process equipment,wave soldering equipment,Miniature digital processing equipment, Intelligent power distribution switch,Power quality products, reactive compensation equipments, The associated control devices

◆SPECIFIC ATIONS

items characteristics
Category temperature Range -25~+85℃
Rated voltage Range 350~450VDC
Capacitance Tolerance ± 20%(M)--------------at 20℃/120HZ
Leakage Current I=0.02CV or 5mA,whichever is smaller
I: Where, I : Max. leakage current(µA)、C: Nominal capacitance(µF)、Rated voltage (V)at 20℃after 5 minutes)
Dissipation Factor(tanδ) 0.25max -------------------at 20℃/120HZ 
Low Temperature characteristics Capacitance change C(-25℃)/C(+20℃)≥0.7------------at 20℃/120HZ
Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
Insulation Withstanding Voltage When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85℃。
Capacitance change ≤±20% of the initial value
D.F. (tanδ) ≤200% of the initial specified value
Leakage current ≤The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
Capacitance change ≤±20% of the initial value
D.F. (tanδ) ≤150% of the initial specified value
Leakage current ≤The initial specified value

SRANDRAD RATINGS

W.V cap Case sizeD x L tanδ120HZ Rated ripple current(Ams/85℃,120HZ) Part NO.
[Vdc]  [μF] [mm] 20℃
350 3300 63.5*115 0.15 14.4 LGR351M5C332MDB5
3900 63.5*130 0.15 16.6 LGR351M5C392MDD0
4700 63.5*155 0.15 19.8 LGR351M5C472MDF5
4700 76.2*115 0.15 19.1 LGR351M5C472MEB5
5600 63.5*170 0.15 22.5 LGR351M5C562MDH0
5600 76.2*130 0.15 21.9 LGR351M5C562MED0
6800 76.2*155 0.15 26.2 LGR351M5C682MEF5
8200 76.2*170 0.15 30 LGR351M5C822MEH0
8200 89*155 0.15 29.2 LGR351M5C822MFF5
10000 89*170 0.15 33.7 LGR351M5C103MFH0
12000 100*190 0.15 37.8 LGR351M5C123MGK0
15000 100*250 0.15 47.7 LGR351M5C153MGR0
400 2700 63.5*115 0.15 13.1 LGR401M5C272MDB5
3300 63.5*130 0.15 15.2 LGR401M5C332MDD0
3900 63.5*155 0.15 17.9 LGR401M5C392MDF5
3900 76.2*115 0.15 18.2 LGR401M5C392MEB5
4700 63.5*170 0.15 20.5 LGR401M5C472MDH0
4700 76.2*130 0.15 20.1 LGR401M5C472MED0
5600 76.2*155 0.15 23.8 LGR401M5C562MEF5
400 6800 76.2*170 0.15 27.3 LGR401M5C682MEH0
6800 89*155 0.15 26.6 LGR401M5C682MFF5
8200 89*170 0.15 30.5 LGR401M5C822MFH0
10000 100*190 0.15 34.5 LGR401M5C103MGK0
12000 100*220 0.15 40.2 LGR401M5C123MGN0
450 2200 63.5*115 0.15 11.8 LGR451M5C222MDB5
2700 63.5*130 0.15 13.7 LGR451M5C272MDD0
2700 76.2*115 0.15 14.5 LGR451M5C272MEB5
3300 63.5*155 0.15 16.5 LGR451M5C332MDF5
3300 76.2*130 0.15 16.9 LGR451M5C332MED0
3900 63.5*170 0.15 18.7 LGR451M5C392MDH0
4700 76.2*155 0.15 21.7 LGR451M5C472MEF5
5600 76.2*190 0.15 26.1 LGR451M5C562MEK0
5600 89*155 0.15 24.1 LGR451M5C562MFF5
6800 89*170 0.15 27.8 LGR451M5C682MFH0
8200 89*190 0.15 32 LGR451M5C822MFK0
10000 100*220 0.15 36.8 LGR451M5C103MGN0
12000 100*250 0.15 42.7 LGR451M5C123MGR0

In addition, ø 100 products are tentative specifications, please confirm the time of ordering

◆ RTED RIPPLE CURRENT MUIERS

The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following

● Frequency Multipliers

Frequency(HZ)

120

300

1K

3K

coefficient

1.0

1.1

1.3

1.4

Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

Previous post:LCS

Next post:LNB

TypeInfo: Bolt type

Keywords for the information:LGR series capacitor  Circuit-breaker capacitor  Electric welder capacitor